INSTALL - Page 1

  Menu

   Home
   The Product
   The Product in action
   To Launch  your Boat
   To Retrieve your Boat
   The Product Pack
   PowerPoints & Movies
   Reviews
 
   Dealers and Fitters
   Become a dealer
   Dealers Sales Aids
    Installation
    - short version
    - detail version
    - Install FAQ's
  Contact Us
 Click here
 Email - click here
  Buy Product
  Click here
  Become a Dealer

   Click here


 

Installation - detail version - page 1
As with most jobs setting up properly saves problems later on. Your marine dealer can install this for you if required. You will find a list of dealers on the website.
(1) Aligning the Trailer Rollers

 












 		 Note - ensure that the bow is in the right position. The centreline of the boat should be down the centreline of the trailer.

Adjust the rollers so that they properly position the boat on the centreline of the trailer.
 

Note - this is an important step and can be a prime source of problems if not carried out properly - even those people who do not have an L-&-RTM unit and are just using the winch can fracture the tape/cable if the rollers are not properly aligned.
(2) Moving the Winch Post
        
Loosen the bolts holding the winch post.
Move the winch post back out of the way, giving you room to replace the U-bolt on the hull with the snare. You can remove it altogether if required.

>Proceed to Page 2 of detail installation

> Return to page Top

Note: The L-&-R boat latch has been granted an International Patent. Persons or Organizations who are found to
be in breach of this patent will be prosecuted to the full extent of the International patent laws.
  Copyright  Release & Retrieve Boat Latch Pty Ltd, 2006 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty Ltd